So for this project I decided to take a hand that I had actually done with concrete last summer and turn it into a jewelry holder. So what I did was I took my hand made of concrete and I put it all inside of a basket that I had lined with plastic so the epoxy would not stick to it but it will keep the epoxy in my basket.
So then all I did was position my hand the way I wanted it, and then I started to fill up my basket on the bottom with seashells and colored glass balls.
And once I had everything position the way I wanted it I then mixed up my Epoxy. Then after it was mix very well I added some green and blue food coloring to it. Once I get the collar the way I wanted it I went ahead and poured my Apoxsee all through my seashells and my colored balls and around my concrete hand.
So then I just let it dry and let it dry overnight it was by 18 hours of drying and then I checked it and it was all the way hard. So I took it out of the basket. The plastic that I had in there, I just had to pick it up out of the basket and peel it off of my epoxy project.
I have to admit this is a very different type of project. I decided to go out on a limb and see if anybody else liked it or not. And pretty much see if I liked it or not LOL.
But when all was said and done I decided I did like it. It’s different that’s for sure. So if you like this project and would like to see others that I have done, make sure you sign up and like this project. And feel free to leave a comment at the bottom. Good luck and happy projecting!